IF800 Lightweight Pro Damping Kit

The IF800 Lightweight Pro Damping Kit is ideal for 0 kg - 1.5 kg payloads that are high-zoom or sensitive to vibrations. This damping kit provides the same level of damping as the stock IF800 damping plate, but allows for quicker payload swapping without tools.

The IF800 Lightweight Pro Damping Kit

Video installation guide demonstrating installation of a IF800 Pro Damping Kit, including removal of the stock damping plate

Removing Stock Damping Plate from the IF800

1. With the aircraft powered off, flip the aircraft upside down to expose the dovetail cage.

1. Remove the four screws securing the damping plate to the aircraft using included 2.5mm hex driver.

1. Securing the nuts underneath with the included 5.5mm nut driver, remove the four screws attaching the dovetail cage with the included 2.5mm hex driver.

Attaching the Lightweight Pro Damping Kit to the IF800

1. Remove the pro damping kit from its packaging and ensure that all parts are present.

1. Place the payload rail with the first position towards the front of the drone, and secure using 4 long M3 screws.

1. Ensuring the payload rail clamps are in the open position and the thumb screw is towards the front, slide the damping plate onto the rails.

1. Secure the clamps on the side. Refer to weight and balance for positioning.

1. Slide on quick disconnect until it clicks into place via the latch on the side.

1. Secure the dovetail cage to the quick disconnect using 4 Short M3 Screws. Then, tighten the the front thumbscrew.

1. The IF800 Lightweight Pro Damping Kit is now ready to use.