INSPIRED DOCUMENTATION
  • IFT Knowledge Base Center
  • PRODUCTS
    • Aircraft
      • IF800 TOMCAT
        • IF800 Tomcat Pilot Operating Handbook
        • IF800 Tomcat Overview
          • Technical Specifications
          • Flight Stack Specifications
          • Aircraft Assembly
          • Payload Mounting
            • Weight and Balance
            • Stock IF800 Damping Plate
            • IF800 Pro Damping Kits
              • IF800 Lightweight Pro Damping Kit
              • IF800 Midweight Pro Damping Kit
              • IF800 Fixed Payload Mounting Kit
          • UPI Panel Connections
          • Aircraft Disassembly and Storage
          • Competitor Analysis
        • Operating The Aircraft
          • Registering the IF800 Tomcat
          • Safe Operating Practices
          • IF800 Pre-flight Checklist
          • Powering On & Off
          • Arm & Disarm
          • Taking Off & Landing (Smart RTL)
        • Aircraft Maintenance
          • Inspection Points
          • Preventative Maintenance Schedule
          • Wear Items
        • Emergency Procedures
          • Loss or Crash of Aircraft
          • Total Loss of Aircraft Control
          • Temporary Loss of Aircraft Control in Manual Mode
          • Temporary Loss of Aircraft Control in Auto Mode
          • Emergency Low Battery
          • Critically Low Battery
        • Useful Documents
      • IF1200
        • About the IF1200
          • Interfaces and Specs
            • Technical Drawings and CAD
            • Spec Sheet
          • Maintenance
            • Navigation Light Replacement
            • Post Flight Maintenance
          • System Updates
            • Software Update Notes
            • Hardware Update Notes
            • Updating Firmware
          • Overview
        • Operating the Aircraft
          • FAA Registration
            • Remote ID
          • Quick Start Guide
          • IF1200A Flight Modes
          • Arming With Remote ID
          • Arm and Disarm
          • Installing Batteries
          • Aircraft Assembly
            • Prop Holders
            • Propeller Installation
            • Safety Collar Landing Gear Installation
            • Retention Pin Landing Gear
          • Aircraft Power
          • Wireless Connection to Ground Station
            • Connect HereLink to Mission Planner via WiFi
            • Connect HereLink and QGround Control via WiFi
          • Takeoff and Landing
          • Preflight Checklist
          • Mission Planning
            • Uploading KMLs in QGC
            • Setup Comm Link in QGC on PC
          • Critical Situations & Emergency Procedure
          • Aircraft Disassembly
          • Sony RX0 FPV Camera
        • IF1200 Manual
        • Useful Documents
      • IF750
        • About the IF750
          • Operating the Aircraft
            • Overview
            • FAA Registration
            • Critical Situations
            • Aircraft Assembly/Disassembly
              • Propeller Floating Screw Replacement
            • Installing the Batteries
            • Aircraft Power
              • Batteries
            • Hand Controllers
              • HereLink Hand Controller (Blue and Black)
              • Long Range Telemetry (LRT)
              • 750 Flight Modes
              • Arm and Disarm
              • QGround Control Basics
            • Preflight Checklist
            • Takeoff and Landing
            • Mission Planning
            • Firmware
        • BlueUAS 2.0
    • Inspired Suite
      • Elevate
        • Getting Started
          • Accessing Your Account
          • Registering Your First Aircraft
          • Registering additional Aircraft to your Fleet
          • Adding Your Team
          • Granting Aircraft Access To Your Pilots
        • How-to
          • Adding Notes
          • Authorizing Pilots to Fly an Aircraft
          • Editing Aircraft
          • Editing Fleets
          • Managing Roles
            • Roles and Permissions Definitions
          • Updating your Phone Number or Password
          • Upload & View 107 License
          • Using Preflight Checklists
          • Viewing Aircraft
          • Viewing Your Team
        • FAQ
      • Inspired Ground Control (IGC)
        • Inspired Ground Control Overview
        • Autonomous Mission Planning
          • Planning a Mission in IGC
          • Safe Piloting in Auto Modes
        • Flight Modes
        • IGC on the IF800
        • Pilot Authentication
        • How to Install IGC from 1.1 or earlier
        • Updating IGC from version 1.2 and beyond
        • How to Install an Older Version of IGC
        • Version History
      • PilotGo App
        • Preflight Checklists
        • Adding Notes
        • Updating an Aircraft Status
        • Contact a team Member
        • Updating your Phone Number or Password
    • Services
      • INSPIRED CARE
      • INSPIRED TRAINING
      • Limited Warranty
    • Retrieving Parameters
    • Frequently Asked Questions
      • General
      • HereLink
      • QGround Control
      • Batteries and Power
      • IF750
    • Batteries
      • IF800 Batteries
        • IB388 Battery Overview
          • IB388 Batteries and Accessories
          • IB388 Features
          • IB388 Technical Specifications
          • Battery Indicators & Error Lights
        • Best Practices
          • IB388 Battery Charging
          • Storage & Transportation
          • IB388 Flight
          • Hot Swapping Batteries
          • Obtaining Battery Statistics via NFC
          • Battery Disposal
        • FAQ and Troubleshooting
      • IF1200 Batteries
        • IF1200 Battery Safety Guidelines
        • Tattu Battery Charger Links
        • Battery Charging
          • Battery Storage
    • Payloads
      • Payload Troubleshooting and FAQ
        • General Integration Troubleshooting
        • General Air Commander Troubleshooting
        • Sony A7R IV
        • Sony RX1R
        • Wiris Enterprise Troubleshooting
      • Payload Swapping on Herelink
      • Air Commander Overview
        • User Guide
      • Gremsy Vio F1
        • Attaching and Detaching from the Dovetail
        • Starting the Vio
        • Herelink Controls
        • Camera Settings on IGC
        • Mission Applications & Zoom Capabilities
        • Data Storage
        • Specs
      • Phase One iXM-100
        • iXM-100 Camera and Gimbal
        • Phase One Mission Planning
        • MavCam for Phase One
      • MicaSense Altum-PT
      • Lidar Kits
        • Inertial Labs Resepi Gen 1 Kit
        • Rock Robotic R3Pro Kit
        • Yellowscan Mapper/ Mapper+/ Surveyor Ultra Gremsy Kit
        • Yellowscan Mapper/ Mapper+ / Surveyor Ultra Skyport Kit
      • Sentera 65R
      • Sony A7R IV
      • Sony ILX-LR1
        • Mounting & Detaching LR1 to Dovetail
        • IGC LR1 Controls / Interface
        • Mapping Settings for LR1
        • Geotagging Images with .Exif Data on IGC v1.2 or later
        • FAQ & Troubleshooting Tips
      • Sony RX1R
      • Wiris Enterprise
    • Accessories
      • Inspired Flight NAV RTK Base Station
        • Technical Specifications
        • Base Station Gear Setup
        • Setup and Operation in Mission Planner (On Laptop)
        • Setup and Operation in QGC (On Laptop)
        • FAQ
    • Hand Controllers
      • Dual Operator Instructions
      • HereLink Hand Controller (Blue and Black)
        • HereLink GCS Overview
          • Pairing HereLink Radio
          • Updating HereLink Software
        • Using the HereLink Hand Controller
        • Herelink Wired Screen Sharing
        • HereLink Binding / Pairing
        • HereLink Updating
        • HereLink Calibrations
        • Installing a Custom App
        • Dual Operator Setup
          • Dual Operator Instructions
      • Long Range Telemetry (LRT)
        • Setting up the Long Range Telemetry Radio
        • PWM Triggering
      • SRoC
        • Troubleshooting Tips
    • Additional Software
      • QGC
        • Uploading KMLs into QGC
        • QGC Mission Planning Expedited
        • Set Up Comm Link in QGC on PC
        • QGround Control Basics
        • Flight Modes
      • UgCS
        • UgCS Quick Setup
        • UgCS Custom Digital Elevation Model
      • Mission Planner
        • Mission Planner Quick Mission Setup
      • Retrieving Flight Logs
        • Retrieving Logs in QGround Control
        • Retrieving Logs in Mission Planner
  • More Resources
    • Applications & Datasets
      • Mapping
      • Inspection
      • LiDAR
        • LiDAR Integration Education
    • Helpful Links
Powered by GitBook
On this page
  • Pre-Flight Procedure
  • Controls
  1. PRODUCTS
  2. Hand Controllers

Dual Operator Instructions

PreviousHand ControllersNextHereLink Hand Controller (Blue and Black)

Last updated 11 months ago

Pre-Flight Procedure

STEP
ACTION

1

Power on both controllers

2

On the Main controller, enable mobile hotspot

3

On the Secondary controller, connect to the Main hotspot

4

Close out all open applications

5

Proceed through RID steps and pre-flight checklist for the ACFT then power on

Controls