> For the complete documentation index, see [llms.txt](https://docs.inspiredflight.com/inspired-documentation/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.inspiredflight.com/inspired-documentation/products/inspired-suite/inspired-ground-control-igc/flight-modes.md).

# Flight Modes

## Flight Modes and Descriptions

{% tabs %}
{% tab title="Loiter" %}

* Loiter mode is optimized for **precise movements** and to hold station in latitude, longitude, altitude, and heading.
* If the aircraft is moving and you release the joystick the aircraft will **stop and hold station at the location the aircraft was at when you centered the joystick**. 
  {% endtab %}

{% tab title="Position Hold" %}

* **Position** Hold mode is optimized for **larger movements** compared with Loiter. The aircraft will hold station in latitude, longitude, altitude, and heading.
* If the aircraft is moving and you release the joystick the aircraft will **decelerate and hold station at the location when the aircraft stops moving**.
  {% endtab %}

{% tab title="Return to Launch (RTL)" %}

* This mode is **recommended for normal landings** and for **landing after an autonomous mission**. 
* When activated, the aircraft **automatically returns to its Launch position and lands**. The *Launch position is the original takeoff location of the aircraft.*
  {% endtab %}
  {% endtabs %}

{% hint style="danger" %}
CAUTION! The IF1200A automatically returns to the launch site as a failsafe when the battery voltage gets too low to continue flight; visually monitor the battery level in QGC and replace the battery conservatively to mitigate risk.
{% endhint %}

{% hint style="info" %}
Note: The current flight mode is indicated in the top right corner of the IGC display.
{% endhint %}

{% embed url="<https://youtu.be/JJf4aL48uN4>" %}

## Selecting Flight Modes

{% tabs %}
{% tab title="GS-ONE" %}

| Controller Button/ Switch | Flight Mode   |
| ------------------------- | ------------- |
| F                         | Loiter        |
| N                         | Loiter        |
| S                         | Position Hold |
| RTH                       | RTL           |

<figure><img src="/files/JmdeI1QuBjwZqHUpTRyZ" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/onV9AElYV4LKjp2HnaRa" alt=""><figcaption></figcaption></figure>
{% endtab %}

{% tab title="Herelink" %}

| Controller Button | Flight Mode            |
| ----------------- | ---------------------- |
| **A** Button      | Loiter                 |
| **B** Button      | Position Hold          |
| **Home** Button   | Return to Launch (RTL) |

<figure><img src="/files/8dGLCpNDlorGlORzkda2" alt=""><figcaption><p>Figure 1: Blue HereLink Controller button pane on bottom section of controller.</p></figcaption></figure>

<figure><img src="https://lh3.googleusercontent.com/Rmk-WVIvDb4-DTsk_ZXMDzdt36Q0El7E0Zb-YQlQsxu59R56q-oGtHX40gqsy_OE5BlobL_36wZbO677cFbHl4TwLI500XQbGixY8TFXruFOjrOsQW64a-Q-WtvuHPbkHf7ma51rYFljpkJZ65SlcJ4OjJFyAbOCjoT-Jjlqihx4zzXY7KVnm-iuR-HJrA" alt=""><figcaption></figcaption></figure>
{% endtab %}

{% tab title="Jeti DS-12 " %}

| Controller Command | Location on Controller                                             | Flight Mode            |
| ------------------ | ------------------------------------------------------------------ | ---------------------- |
| **A** Button       | Top of three-way switch on upper-right of front panel.             | Loiter                 |
| **B** Button       | Mid-position of three-way switch on upper-right of front panel.    | Position Hold          |
| **Home** Button    | Bottom position of three-way switch on upper-right of front panel. | Return to Launch (RTL) |

{% hint style="info" %}
NOTE: When the Mode Switch on the Jeti DS-12 is used to switch flight modes, the display on the ground control station updates to show the new flight mode.                &#x20;
{% endhint %}
{% endtab %}
{% endtabs %}