INSPIRED DOCUMENTATION
  • IFT Knowledge Base Center
  • PRODUCTS
    • Aircraft
      • IF800 TOMCAT
        • IF800 Tomcat Pilot Operating Handbook
        • IF800 Tomcat Overview
          • Technical Specifications
          • Flight Stack Specifications
          • Aircraft Assembly
          • Payload Mounting
            • Weight and Balance
            • Stock IF800 Damping Plate
            • IF800 Pro Damping Kits
              • IF800 Lightweight Pro Damping Kit
              • IF800 Midweight Pro Damping Kit
              • IF800 Fixed Payload Mounting Kit
          • UPI Panel Connections
          • Aircraft Disassembly and Storage
          • Competitor Analysis
        • Operating The Aircraft
          • Registering the IF800 Tomcat
          • Safe Operating Practices
          • IF800 Pre-flight Checklist
          • Powering On & Off
          • Arm & Disarm
          • Taking Off & Landing (Smart RTL)
        • Aircraft Maintenance
          • Inspection Points
          • Preventative Maintenance Schedule
          • Wear Items
        • Emergency Procedures
          • Loss or Crash of Aircraft
          • Total Loss of Aircraft Control
          • Temporary Loss of Aircraft Control in Manual Mode
          • Temporary Loss of Aircraft Control in Auto Mode
          • Emergency Low Battery
          • Critically Low Battery
        • Useful Documents
      • IF1200
        • About the IF1200
          • Interfaces and Specs
            • Technical Drawings and CAD
            • Spec Sheet
          • Maintenance
            • Navigation Light Replacement
            • Post Flight Maintenance
          • System Updates
            • Software Update Notes
            • Hardware Update Notes
            • Updating Firmware
          • Overview
        • Operating the Aircraft
          • FAA Registration
            • Remote ID
          • Quick Start Guide
          • IF1200A Flight Modes
          • Arming With Remote ID
          • Arm and Disarm
          • Installing Batteries
          • Aircraft Assembly
            • Prop Holders
            • Propeller Installation
            • Safety Collar Landing Gear Installation
            • Retention Pin Landing Gear
          • Aircraft Power
          • Wireless Connection to Ground Station
            • Connect HereLink to Mission Planner via WiFi
            • Connect HereLink and QGround Control via WiFi
          • Takeoff and Landing
          • Preflight Checklist
          • Mission Planning
            • Uploading KMLs in QGC
            • Setup Comm Link in QGC on PC
          • Critical Situations & Emergency Procedure
          • Aircraft Disassembly
          • Sony RX0 FPV Camera
        • IF1200 Manual
        • Useful Documents
      • IF750
        • About the IF750
          • Operating the Aircraft
            • Overview
            • FAA Registration
            • Critical Situations
            • Aircraft Assembly/Disassembly
              • Propeller Floating Screw Replacement
            • Installing the Batteries
            • Aircraft Power
              • Batteries
            • Hand Controllers
              • HereLink Hand Controller (Blue and Black)
              • Long Range Telemetry (LRT)
              • 750 Flight Modes
              • Arm and Disarm
              • QGround Control Basics
            • Preflight Checklist
            • Takeoff and Landing
            • Mission Planning
            • Firmware
        • BlueUAS 2.0
    • Inspired Suite
      • Elevate
        • Getting Started
          • Accessing Your Account
          • Registering Your First Aircraft
          • Registering additional Aircraft to your Fleet
          • Adding Your Team
          • Granting Aircraft Access To Your Pilots
        • How-to
          • Adding Notes
          • Authorizing Pilots to Fly an Aircraft
          • Editing Aircraft
          • Editing Fleets
          • Managing Roles
            • Roles and Permissions Definitions
          • Updating your Phone Number or Password
          • Upload & View 107 License
          • Using Preflight Checklists
          • Viewing Aircraft
          • Viewing Your Team
        • FAQ
      • Inspired Ground Control (IGC)
        • Inspired Ground Control Overview
        • Autonomous Mission Planning
          • Planning a Mission in IGC
          • Safe Piloting in Auto Modes
        • Flight Modes
        • IGC on the IF800
        • Pilot Authentication
        • How to Install IGC from 1.1 or earlier
        • Updating IGC from version 1.2 and beyond
        • How to Install an Older Version of IGC
        • Version History
      • PilotGo App
        • Preflight Checklists
        • Adding Notes
        • Updating an Aircraft Status
        • Contact a team Member
        • Updating your Phone Number or Password
    • Services
      • INSPIRED CARE
      • INSPIRED TRAINING
      • Limited Warranty
    • Retrieving Parameters
    • Frequently Asked Questions
      • General
      • HereLink
      • QGround Control
      • Batteries and Power
      • IF750
    • Batteries
      • IF800 Batteries
        • IB388 Battery Overview
          • IB388 Batteries and Accessories
          • IB388 Features
          • IB388 Technical Specifications
          • Battery Indicators & Error Lights
        • Best Practices
          • IB388 Battery Charging
          • Storage & Transportation
          • IB388 Flight
          • Hot Swapping Batteries
          • Obtaining Battery Statistics via NFC
          • Battery Disposal
        • FAQ and Troubleshooting
      • IF1200 Batteries
        • IF1200 Battery Safety Guidelines
        • Tattu Battery Charger Links
        • Battery Charging
          • Battery Storage
    • Payloads
      • Payload Troubleshooting and FAQ
        • General Integration Troubleshooting
        • General Air Commander Troubleshooting
        • Sony A7R IV
        • Sony RX1R
        • Wiris Enterprise Troubleshooting
      • Payload Swapping on Herelink
      • Air Commander Overview
        • User Guide
      • Gremsy Vio F1
        • Attaching and Detaching from the Dovetail
        • Starting the Vio
        • Herelink Controls
        • Camera Settings on IGC
        • Mission Applications & Zoom Capabilities
        • Data Storage
        • Specs
      • Phase One iXM-100
        • iXM-100 Camera and Gimbal
        • Phase One Mission Planning
        • MavCam for Phase One
      • MicaSense Altum-PT
      • Lidar Kits
        • Inertial Labs Resepi Gen 1 Kit
        • Rock Robotic R3Pro Kit
        • Yellowscan Mapper/ Mapper+/ Surveyor Ultra Gremsy Kit
        • Yellowscan Mapper/ Mapper+ / Surveyor Ultra Skyport Kit
      • Sentera 65R
      • Sony A7R IV
      • Sony ILX-LR1
        • Mounting & Detaching LR1 to Dovetail
        • IGC LR1 Controls / Interface
        • Mapping Settings for LR1
        • Geotagging Images with .Exif Data on IGC v1.2 or later
        • FAQ & Troubleshooting Tips
      • Sony RX1R
      • Wiris Enterprise
    • Accessories
      • Inspired Flight NAV RTK Base Station
        • Technical Specifications
        • Base Station Gear Setup
        • Setup and Operation in Mission Planner (On Laptop)
        • Setup and Operation in QGC (On Laptop)
        • FAQ
    • Hand Controllers
      • Dual Operator Instructions
      • HereLink Hand Controller (Blue and Black)
        • HereLink GCS Overview
          • Pairing HereLink Radio
          • Updating HereLink Software
        • Using the HereLink Hand Controller
        • Herelink Wired Screen Sharing
        • HereLink Binding / Pairing
        • HereLink Updating
        • HereLink Calibrations
        • Installing a Custom App
        • Dual Operator Setup
          • Dual Operator Instructions
      • Long Range Telemetry (LRT)
        • Setting up the Long Range Telemetry Radio
        • PWM Triggering
      • SRoC
        • Troubleshooting Tips
    • Additional Software
      • QGC
        • Uploading KMLs into QGC
        • QGC Mission Planning Expedited
        • Set Up Comm Link in QGC on PC
        • QGround Control Basics
        • Flight Modes
      • UgCS
        • UgCS Quick Setup
        • UgCS Custom Digital Elevation Model
      • Mission Planner
        • Mission Planner Quick Mission Setup
      • Retrieving Flight Logs
        • Retrieving Logs in QGround Control
        • Retrieving Logs in Mission Planner
  • More Resources
    • Applications & Datasets
      • Mapping
      • Inspection
      • LiDAR
        • LiDAR Integration Education
    • Helpful Links
Powered by GitBook
On this page
  • Camera Settings
  • Extended Settings
  1. PRODUCTS
  2. Payloads
  3. Gremsy Vio F1

Camera Settings on IGC

PreviousHerelink ControlsNextMission Applications & Zoom Capabilities

Last updated 3 months ago

Camera Settings

Extended Settings

This menu allows the user to customize the actions of the Vio camera in EO mode and IR mode. Ensure RC Mode stays set to Gremsy and the EO Zoom Mode is set to Super Resolution for the on screen zoom buttons to function properly. If the menu is opened in IR video mode it will show settings for the IR camera.

To open extended settings select the white gear icon in the top right corner of the IGC screen.

Camera settings for the Gremsy Vio using inspired Ground Control (IGC 1.1.1).
Camera settings for the Gremsy Vio using inspired Ground Control (IGC 1.0).
Vio extended settings in EO mode. Accessible via gear icon top right. (IGC 1.1.1)
Vio extended settings in EO mode. Accessible via gear icon top right. (IGC 1.0)
Vio extended settings in IR mode. Accessible via gear icon top right. (IGC 1.1.1)
Vio extended settings in IR mode. Accessible via gear icon top right. (IGC 1.0)