IGC LR1 Controls / Interface

IGC LR1 Controls / Interface:

The LR1 is controlled by on screen controls that automatically populate when the payload is attached.

IGC (1.1.1) LR1 Payload Controls

Manual Shutter Trigger

Auto Shutter Trigger (mapping missions)

Shutter Half Press (manually focus sensor)

Start / Stop Video Recording

Exposure

Shutter Speed

ISO

Digital Zoom

Gimbal Yaw

Gimbal Tilt

To control the Gimbal Pan/Tilt Angle, use the physical scrolling wheel on the top left of the Herelink. To swap between the two, select the Pan/Tilt switch button on the top of the Herelink.
Camera actions are controlled by the on screen buttons listed in the image above. (IGC 1.1.1)

  • When you press the "Cycle Settings" button, it will change which setting the '+' and '-' buttons increase and decrease the value of: Exposure (EXP), ISO (ISO), Shutter (SHT), Zoom (ZM).

Cycle Settings Button allows you to cycle through the different camera settings options. The '+' and '-' buttons increase or decrease the value of the selected camera setting.
PreviousMounting & Detaching LR1 to DovetailNextMapping Settings for LR1

Last updated