Specifications

You can utilize the specs sheet below in determining the IF1200 flight time for potential payloads: (adding gimbal weight + camera/sensor weight to determine the payload weight and reference the graph below to determine flight time.)

Performance

Specification
Metric Value
Imperial Value

Max Ascent Speed

5m/s

16 ft/s

Max Descent Speed

2.5m/s

8.2 ft/s

Max Air Speed

25m/s

56 mph

Max Wind Resistance

12m/s, 15m/s gusts

23 knot, 29 knot gusts

Max Tilt Angle

30°

Max Angular Velocity

Tilt: 300°/s, Yaw: 45°/s

Operating Temperature

-20°C ~ 45°C

-4°F ~ 113°F

Service Ceiling (with given payload)

3.9km (12,8000 ft) w/4 kg, 2.2 km (7,200 ft) w/ 8.7 kg

Physical

Specification
Metric Value
Imperial Value

Diagonal Size (propeller center to center)

1,025 mm

40.4 inches

Unfolded Size (flight ready, WxLxH)

165.5 x 154 x 76.5 cm

65.1 x 60.6 x 30.2 inches

Folded Size (stow, WxLxH)

47.5 x 49.5 x 47 cm

18.7 x 19.5 x 18.5 inches

Empty Weight (w/o batteries)

7.8 kg

17.2 lbs

Weight w/ Batteries

16.3 kg

35.9 lbs

Max Gross Takeoff Weight

25.0 kg

55.0 lbs

Max Payload Capacity

8.7 kg

19.1 lbs

Transport Case Size (WxLxH)

64.8 x 64.8 x 58.4 cm

25.5 x 25.5 x 23.0 inches

Transport Case Weight (w/ aircraft & GCS)

29.0 kg

64 lbs

Flight Stack

Component
Specification

Flight Controller

CubePilot Cube Blue H7, Triple Redundant IMU

GNSS / Compass

Dual CubePilot Here3 M8P

Payload Power Rails

12s Battery Voltage, 5v, 12v/15v 18v, 44.4v

Payload Interface

IF1200A Universal Payload Interface 2.1

Operating Software

Copter by Ardupilot

Flight Mode

Flight Mode
Description

Position Hold

Maintains GPS position and altitude with responsive controls for faster speeds.

Loiter

Holds GPS position and altitude for slow, precise, and stable flying.

Auto

Executes pre-defined waypoint mission

RTL

Auto returns to takeoff location and lands

Land

Auto land while maintaining horizontal position

Altitude Hold

Holds altitude only, failsafe mode if GPS signal lost

Last updated