Power & Charging
Charging
Connect the USB-C to USB-C cable to the supplied charger
Open the waterproof cover and connect the cable to the USB-C port
Plug the charger into an outlet
Charging stops automatically when full.
Charging stops if battery temperature exceeds 104°F (40°C)
WARNING
Do not charge when wet.
Avoid heat sources and direct sunlight.
Charge between 41°F ~ 104°F (5° ~ 40°)
CAUTION
When storing the GS-ONE long-term, check the battery's power level every 1-3 months to ensure battery health and prevent over-discharge.
Use the provided charger for best performance. If using a third-party charger, ensure it supports a minimum charging current of 2.25A.
Power On/Off
Power On Press and hold the power button for 3 seconds or more until the device powers on.
Power Off Press and hold the power button for 1.5 seconds, then select OK to the pop-up screen to confirm shutdown.
Low Battery Vibration Warning
When the drone’s battery voltage drops below the set value, the controller will vibrate to warn you.
The default value of 3.6 V works for Lithium-Ion and Lithium-Polymer batteries, which are fully charged at 4.2 V per cell and empty at 3.0 V per cell. You can change this value if needed.
When the drone reaches the preset low battery level, GS-ONE will vibrate to indicate a low battery warning. This is not the emergency level.
Last updated