Setup Comm Link in QGC on PC
This brief series of instructions details how to set up QGC on your PC to load missions to your Inspired Flight drone
Last updated
This brief series of instructions details how to set up QGC on your PC to load missions to your Inspired Flight drone
Last updated
1
With a PC connected to your drone and the drone powered on, open QGround Control on the PC.
2
Go to QGC settings by clicking the "Q" icon in the upper right corner.
3
Go to Application Settings
4
Select the Comm Links option from the menu
5
Click on the "Add" button at the bottom of the screen.
6
Name your Comm Link, select in the Type drop-down menu, select "Serial," change Serial Port to the correct MavLink communication port, and ensure the Baud Rate is set to 57600. Click "Ok."
7
With these settings configured and your drone powered on, select your new Comm Link, and click the "Connect" button at the bottom of the Comm Links screen.
8
Your PC should now be connected to your drone and you should be able to plan missions and load them from your PC.
