INSPIRED DOCUMENTATION
  • IFT Knowledge Base Center
  • PRODUCTS
    • Aircraft
      • IF800 TOMCAT
        • IF800 Tomcat Pilot Operating Handbook
        • IF800 Tomcat Overview
          • Technical Specifications
          • Flight Stack Specifications
          • Aircraft Assembly
          • Payload Mounting
          • UPI Panel Connections
          • Weight and Balance
          • Aircraft Disassembly and Storage
          • Competitor Analysis
        • Operating The Aircraft
          • Registering the IF800 Tomcat
          • Safe Operating Practices
          • IF800 Pre-flight Checklist
          • Powering On & Off
          • Arm & Disarm
          • Taking Off & Landing (Smart RTL)
        • Aircraft Maintenance
          • Inspection Points
          • Preventative Maintenance Schedule
          • Wear Items
        • Emergency Procedures
          • Loss or Crash of Aircraft
          • Total Loss of Aircraft Control
          • Temporary Loss of Aircraft Control in Manual Mode
          • Temporary Loss of Aircraft Control in Auto Mode
          • Emergency Low Battery
          • Critically Low Battery
        • Useful Documents
      • IF1200A
        • About the IF1200A
          • Interfaces and Specs
            • Technical Drawings and CAD
            • Spec Sheet
          • Maintenance
            • Navigation Light Replacement
            • Post Flight Maintenance
          • System Updates
            • Software Update Notes
            • Hardware Update Notes
            • Updating Firmware
          • Overview
        • Operating the Aircraft
          • FAA Registration
            • Remote ID
          • Quick Start Guide
          • IF1200A Flight Modes
          • Arming With Remote ID
          • Arm and Disarm
          • Installing Batteries
          • Aircraft Assembly
            • Prop Holders
            • Propeller Installation
            • Safety Collar Landing Gear Installation
            • Retention Pin Landing Gear
          • Aircraft Power
          • Wireless Connection to Ground Station
            • Connect HereLink to Mission Planner via WiFi
            • Connect HereLink and QGround Control via WiFi
          • Takeoff and Landing
          • Preflight Checklist
          • Mission Planning
            • Uploading KMLs in QGC
            • Setup Comm Link in QGC on PC
          • Critical Situations & Emergency Procedure
          • Aircraft Disassembly
          • Sony RX0 FPV Camera
        • IF1200A Manual
        • Useful Documents
      • IF750
        • About the IF750
          • Operating the Aircraft
            • Overview
            • FAA Registration
            • Critical Situations
            • Aircraft Assembly/Disassembly
              • Propeller Floating Screw Replacement
            • Installing the Batteries
            • Aircraft Power
              • Batteries
            • Hand Controllers
              • HereLink Hand Controller (Blue and Black)
              • Long Range Telemetry (LRT)
              • 750 Flight Modes
              • Arm and Disarm
              • QGround Control Basics
            • Preflight Checklist
            • Takeoff and Landing
            • Mission Planning
            • Firmware
        • BlueUAS 2.0
    • Inspired Suite
      • Elevate
        • Getting Started
          • Accessing Your Account
          • Registering Your First Aircraft
          • Registering additional Aircraft to your Fleet
          • Adding Your Team
          • Granting Aircraft Access To Your Pilots
        • How-to
          • Adding Notes
          • Authorizing Pilots to Fly an Aircraft
          • Editing Aircraft
          • Editing Fleets
          • Managing Roles
          • Updating your Phone Number or Password
          • Upload & View 107 License
          • Using Preflight Checklists
          • Viewing Aircraft
          • Viewing Your Team
        • FAQ
      • Inspired Ground Control (IGC)
        • Inspired Ground Control Overview
        • Autonomous Mission Planning
          • Planning a Mission in IGC
          • Safe Piloting in Auto Modes
        • Flight Modes
        • IGC on the IF800
        • Pilot Authentication
        • How to Install IGC from 1.1 or earlier
        • Updating IGC from version 1.2 and beyond
        • Version History
      • PilotGo App
        • Preflight Checklists
        • Adding Notes
        • Updating an Aircraft Status
        • Contact a team Member
        • Updating your Phone Number or Password
    • Services
      • INSPIRED CARE
      • INSPIRED TRAINING
      • Limited Warranty
    • Retrieving Parameters
    • Frequently Asked Questions
      • General
      • HereLink
      • QGround Control
      • Batteries and Power
      • IF750
    • Batteries
      • IF800 Batteries
        • IB388 Battery Overview
          • IB388 Batteries and Accessories
          • IB388 Features
          • IB388 Technical Specifications
          • Battery Indicators & Error Lights
        • Best Practices
          • IB388 Battery Charging
          • Storage & Transportation
          • IB388 Flight
          • Hot Swapping Batteries
          • Obtaining Battery Statistics via NFC
          • Battery Disposal
        • FAQ and Troubleshooting
      • IF1200 Batteries
        • IF1200 Battery Safety Guidelines
        • Tattu Battery Charger Links
        • Battery Charging
          • Battery Storage
    • Payloads
      • Payload Troubleshooting and FAQ
        • General Integration Troubleshooting
        • General Air Commander Troubleshooting
        • Sony A7R IV
        • Sony RX1R
        • Wiris Enterprise Troubleshooting
      • Payload Swapping on Herelink
      • Air Commander Overview
        • User Guide
      • Gremsy Vio F1
        • Attaching and Detaching from the Dovetail
        • Starting the Vio
        • Herelink Controls
        • Camera Settings on IGC
        • Mission Applications & Zoom Capabilities
        • Data Storage
        • Specs
      • Phase One iXM-100
        • iXM-100 Camera and Gimbal
        • Phase One Mission Planning
        • MavCam for Phase One
      • MicaSense Altum-PT
      • Sentera 65R
      • Sony A7R IV
      • Sony ILX-LR1
        • Mounting & Detaching LR1 to Dovetail
        • IGC LR1 Controls / Interface
        • Mapping Settings for LR1
        • How to Reformat Geotagged Files
        • FAQ & Troubleshooting Tips
      • Sony RX1R
      • Wiris Enterprise
    • Accessories
      • Inspired Flight NAV RTK Base Station
        • Technical Specifications
        • Base Station Gear Setup
        • Setup and Operation in Mission Planner (On Laptop)
        • Setup and Operation in QGC (On Laptop)
        • FAQ
    • Hand Controllers
      • Dual Operator Instructions
      • HereLink Hand Controller (Blue and Black)
        • HereLink GCS Overview
          • Pairing HereLink Radio
          • Updating HereLink Software
        • Using the HereLink Hand Controller
        • Herelink Wired Screen Sharing
        • HereLink Binding / Pairing
        • HereLink Updating
        • HereLink Calibrations
        • Installing a Custom App
        • Dual Operator Setup
          • Dual Operator Instructions
      • Long Range Telemetry (LRT)
        • Setting up the Long Range Telemetry Radio
        • PWM Triggering
    • Additional Software
      • QGC
        • Uploading KMLs into QGC
        • QGC Mission Planning Expedited
        • Set Up Comm Link in QGC on PC
        • QGround Control Basics
        • Flight Modes
      • UgCS
        • UgCS Quick Setup
        • UgCS Custom Digital Elevation Model
      • Mission Planner
        • Mission Planner Quick Mission Setup
      • Retrieving Flight Logs
        • Retrieving Logs in QGround Control
        • Retrieving Logs in Mission Planner
  • More Resources
    • Applications & Datasets
      • Mapping
      • Inspection
      • LiDAR
        • LiDAR Integration Education
    • Helpful Links
Powered by GitBook
On this page
  • IGC Versioning
  • The list below is in chronological order, with the newest version on top.
  • v1.1.6-dev
  • v1.1.5
  • v1.1.4
  • v1.1.3
  • v1.0.8-5
  • v1.1.2
  • v1.0.8-4
  • v1.0.8-2
  • v1.0.9-1
  • v1.0.8-1
  • v1.0.5-1
  • v1.0.3
  • v1.1.1
  • v1.1.0
  • v1.0.0
  1. PRODUCTS
  2. Inspired Suite
  3. Inspired Ground Control (IGC)

Version History

IGC Versioning

For the safety and performance of your aircraft, we recommend using the most up to date version of IGC. IGC versions are numbered in increasing order, so version 1.1.0 would be older than version 1.1.1 .

  • 1.1.1 is a little bit older than 1.1.2 and indicates a bug fix has occurred in the newest version.

  • 1.1.1 is somewhat older than 1.2.1 and indicates that a feature has been added or improved in the newer version, plus all of the bug fixes that came before 1.2.1.

  • 1.1.1 is much older than 2.1.1 and indicates that a large revision has occurred in the newer version, plus all of the feature updates and bug fixes that came before 2.1.1.

The list below is in chronological order, with the newest version on top.

v1.1.6-dev

  • Auto-detection of SROC pixel density for enhanced display optimization.

  • Improved IGC settings page layout.

v1.1.5

  • Improved device binding for better compatibility.

  • Enhanced handling of status codes.

  • Bug fixes.

v1.1.4

  • Added support for Sony GPS EXIF data in geotagging photos.

  • Fixed video blackout issue when the primary feed is unavailable.

  • Improved messaging for unconnected payloads during initialization.

v1.1.3

  • Introduced IGC Blocker Panel to manage restricted UI interactions.

  • Enhanced RTSP button stability and positioning.

  • Various UI improvements.

v1.0.8-5

  • Fixed issue where the "Exit" button sometimes failed to display.

  • Improved handling of network unavailability.

  • Fixed flash cancellation functionality.

v1.1.2

  • Fixed bugs with video preview and RTSP selector resizing.

  • Improved layout for photo and video controls.

v1.0.8-4

  • Fixed incorrect "Follow" mode display after VIO calibration.

  • Removed default Herelink mapping.

  • Bug fixes.

v1.0.8-2

  • Improved download progress visibility and formatting for Android devices.

  • Added camera firmware save path for Android users.

  • Fixed Android-specific tab visibility issue.

v1.0.9-1

  • Introduced FTP upload functionality through the GUI.

  • Improved handling of disconnected cameras and ILX tab closures.

v1.0.8-1

  • Updated LR1 URL for improved accuracy.

  • Enabled version information in settings API.

v1.0.5-1

  • Shortened communication-lost message for clarity.

  • Updated disconnect button to a streamlined action.

  • Bug fixes.

v1.0.3

  • Automatically configures RTSP for detected payloads.

  • Added parameter mismatch prompts for payloads.

v1.1.1

  • Bug fixes and improvements to CI/CD processes.

v1.1.0

  • Streamlined IGC settings for easier configuration.

  • Improved workflows for download and delete functionality.

  • Introduced support for signing keystores with IGC.

v1.0.0

  • Initial release.

  • Added APK installation and self-reporting features.

  • Introduced login panel with support for multiple user profiles.

PreviousUpdating IGC from version 1.2 and beyondNextPilotGo App

Last updated 1 month ago