Aircraft Power
Last updated
Last updated
1 | Plug in both batteries’ XT90 connectors into the corresponding female ports near the rear shoulders (see below). Note: Ensure the battery connectors are fully seated in the ports to avoid loose connections. |
2 | The aircraft will emit a series of beeps during the initialization sequence. The GPS status indicator displays as follows:
|
3 | Navigation LEDs: There are four navigation LEDs on the aircraft:
|
1 | Disconnect the batteries by pulling on the connector, not the wires. |
2 | Power down the hand controller by holding the Power button in, then follow the on-screen prompts. |