Setting up the Long Range Telemetry Radio

NOTE: Before performing this procedure, your Ground Control Station software must be Installed on the device (laptop or tablet) that will be used as the ground control station.

STEP	ACTION
1	Plug the Long Range Telemetry (LRT) radio into an open USB port on the ground control station (Fig. 1 below)

Figure 1: LRT plugging into USB port on GCS

2	Turn on the Jeti DS-12 by pressing the Power button for two seconds (Fig. 2)
3	When the screen activates, it prompts you with, “Start Transmitter?” Press the button “Yes” (Fig. 3).

Figure 2: Jeti DS-12 Power Button

Figure 3: Jeti DS-12 Display